Comments for DYMO Label Inside Out

Comment on DYMO Label software version 8.3.1 for Mac by pi

pi — Tue, 15 May 2012 11:04:03 +0000

Have you tried to print with the latest DLS 8.4.0 for Mac?
http://sites.dymo.com/Support/Pages/ProductDetails.aspx?MainTab=1&Tab=1&ProductID=DYMODLS8-MAC(DYMO)

If it doesn’t solve your problem then check the following blog post on how to contact DYMO support.
http://developers.dymo.com/2011/10/12/sdk-troubleshooting-tips/

Comment on DYMO Label software version 8.3.1 for Mac by panutat

panutat — Mon, 14 May 2012 22:35:32 +0000

For some reason when I try to print with continuous receipt paper in OSX, (2) separate long sheets get printed out. In windows, only (1) fixed length sheet gets printed (which is what I configured XML for). Anyone else experience this issue?

Comment on DYMO Label Framework JavaScript Library 1.2.4 by bensinclair00

bensinclair00 — Mon, 14 May 2012 00:20:49 +0000

Thank you! Shall do :)

Comment on Announcing DYMO LabelWriter/LabelManager SDK 1.4.0 for Linux by pi

pi — Thu, 10 May 2012 17:04:54 +0000

The idProduct of the 2nd USB configuration is 0×1002.

Comment on Announcing DYMO LabelWriter/LabelManager SDK 1.4.0 for Linux by Mrehqe

Mrehqe — Thu, 10 May 2012 15:38:34 +0000

I try to switch off uneeded usb storage drive to leave only printer usb. I try to use USB_ModeSwitch (http://www.draisberghof.de/usb_modeswitch/#usage) with this rule:

—————————————————————————————————————————-

DefaultVendor= 0×0922 # idVendor 0×0922 Dymo-CoStar Corp.
DefaultProduct= 0×1001 # idProduct 0×1001

# To Printer mode:

TargetVendor= 0×0922 # idVendor 0×0922 Dymo-CoStar Corp.
TargetProduct= XXXXXX

MessageContent=”XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX”
—————————————————————————————————————————-

But i don’t now XXX value. You can help? I find others value from lsusb

Comment on DYMO Label Framework JavaScript Library 1.2.4 by dymodev

dymodev — Thu, 10 May 2012 10:56:54 +0000

Please forward your questions regarding the SDK to the e-mail mentioned in the following blog post http://developers.dymo.com/2011/10/12/sdk-troubleshooting-tips/

Comment on DYMO Label Framework JavaScript Library 1.2.4 by bensinclair00

bensinclair00 — Thu, 10 May 2012 03:29:17 +0000

Hi there,

What would cause labels to print out like this?

All my other customers have been able to print fine using the same software. Could it be the type of label they’re using?

Thanks

Ben

Comment on Announcing DYMO LabelWriter/LabelManager SDK 1.4.0 for Linux by pi

pi — Wed, 09 May 2012 17:49:27 +0000

The DYMO LabelManager PnP has 2 USB configuration and each configuration is a composite device. The first and default USB configuration reports as a HID interface and a MAS interface. The second USB configuration reports as a printer interface, a HID interface and a MAS interface. Therefore custom software is required to tell the LabelManager PnP to start the second USB configuration in order to print.

Comment on Announcing DYMO LabelWriter/LabelManager SDK 1.4.0 for Linux by Mrehqe

Mrehqe — Wed, 09 May 2012 17:28:12 +0000

There is an lmpnp.ppd file :( . It ‘a shame that there is not a driver for label manager pnp. there is another way to use this device on linux? It will take a long time before it is released?It’s planned?

Comment on DYMO SDK Extension Update for Firefox 12.0 by pi

pi — Wed, 09 May 2012 11:17:23 +0000

Please check the following blog post on SDK Troubleshooting tips and on how to contact DYMO regarding SDK and DYMO Label software questions.
http://developers.dymo.com/2011/10/12/sdk-troubleshooting-tips/